Saturday 7 April 2018

How to Fix Paper Jam Error Displays on HP Officejet 4610 All-in-One Series?

HP printers are one of the reliable printers enriched with highly secured features and facilities. HP Officejet 4610 All-In-One printer series that is offered with advanced features can perform a task from printing to scanning including faxing. But, sometimes you can have some technical bugs with the printer like any other computing device. Most of the users have encountered the error message “Paper Jam. Clear jam and then touch OK' display on the printer control panel. Because of this error, Power button light might also blink fast. In this situation, you are required to have HP Printer Help from reliable support desk. 

To prevent your printer from paper jam issue, you need to be very careful and you must keep following points in your mind-

You should put any objects on the top of the HP printer that could potentially fall inside the input tray. 

The stack should be even on both the sides, therefore, you need to hold the stack of paper and then tap the bottom edge on a flat surface.

Never overload the tray with the paper and only add paper tray when the printer is not printing. 

The above recommendation can help you in future to prevent your printer from paper jam issues.

There are multiple reasons behind the occurrence of paper jam problem on your HP printer that includes third-party product has fallen into the paper tray, might be some damaged and dirty paper rollers are causing the problem, the paper is maybe jammed inside the tray that you cannot see and lot more.

Follow the solutions given below that would help you to fix the paper jam issues immediately-

Method 1- Make sure that the printer rests on the flat surface:

Check the surface the printer rests on

Ensure that the place should be flat, level and hard where you have placed the printer. 

Printer base should not lie in anything that can cause the product to tilt or even slightly. 

Now, you shall pull out the paper tray and load 100 sheets in the paper tray.

After that simply push the paper tray back into the product.

Method 2- Reset the printer:

Resting the device is one of the common and reliable solutions that can resolve most of the issues easily. Follow these steps to perform a power reset.

First of all, you need to press the Power button to turn on the product.

Disconnect all the power cords and another connected device to the printer.

Now, you have to unplug the power cord from the wall outlet.

Here, you are required to wait for few seconds and then plug the power cord back into the wall outlet. 

Then, simply reconnect the power cord to the rear of the product.

Press the Power button to turn on the printer. 

If the problem still persists, then you should directly contact at HP Printer Help Phone Number – (1-888-614-1214). We are right here to provide quick help on your desk. We work with a team of experts who capable enough to fix each and every issue associated with HP printer. 

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. resolutions from the team in quick time. The team is always at your service all you have to do is contact them at any time.Are you unable to access the Gemini exchange account? In order to fix this issue, you can join hands with the team of specialists who knows all the pros and cons of Gemini. They are expert in handling the problem and errors that hinder your path. Dial Gemini Support Phone Number 1-800-861-8259 Gemini Support Number

    ReplyDelete

Get Important Tips & Tricks to Fix HP Touchpad Error Code 3099

HP laptops are provided with sensitive Touchpad to perform different functions using combination of gestures and fingers.   If you use co...