Technical Guidelines to fix HP Laserjet Pro M1132 Error E8

When the E8 error lights up on the HP Laserjet Pro M1132 printer starts flashing, it usually indicates that the problem is with the scanner carriage. After the movement stalls of the carriage, the printer automatically responds by sending an E8 error light. To resolve the problem and to know more about the issue, you can use HP Printer Technical Support Number to connect with experts. 

The irregularity of the software or the breakage in the scanner can be the major reason for the problem. Moreover the problem can be the motor itself. Furthermore, other common reasons that can be the cause of the error are like the culprit staged mechanically because of the expected wear and tear of the parts of the printer. Dust debris and accumulated on the sensitive mechanical arms and rubber rollers that might result in limited movement and stalling eventually. Cleaning and maintenance of the printer would easily resolve the problem you are having with your printer.

Lets’ check out the steps mentioned below to clean and maintain the printer-

• First you need to place the HP Laserjet pro m1132 printer over a plane and hard place, possibly in a well-lighted and ventilated area. For the procedure, you need to have a screwdriver, a clean rag and alcohol.

• Launch the main printer cover and then smaller inner over.  

• After this, you need to unlock the ink cartridge lever and then hold the handle and pull it out.

• Now, check for the printer roller and unclip the holder.  

• In the next step, you need to hold the roller and clean it with the rag damped with alcohol. Then wait till it gets dry. Then you need to perform full cleaning in order to remove dust accumulated ink and other dust substances that coat the surface.

• After this, clip the roller back as the correct reinstallation will produce a distinct click as the roller sets into position.

• Further, printer sideways needs to be turned on and look for the jack at the back. You need to remove the two nuts and pull the jack out.

• Next, you have to shut the printer off and power up, in case the error light still blink, launch the scanner cover and look for the drive gears.  

• Simply close the printer, once you applied oil on the drive gears.

• Then, again turn on the printer. 

The above-stated process is the simple to resolve the problem of error E8 on your HP Laserjet Pro M1132 E8 error lights. Maintenance and cleaning of the printer are important to keep the printer away from the problems. Moreover, in order to repair your HP Laserjet printer, connect our customer service via HP Printer Technical Support Phone Number +1-888-614-1214. We are right here to deliver flawless and quite best support for HP printer. Feel free to contact us anytime anywhere around the world.